[koko_pebble]

i have a 1965 mustang, and i was wondering if there is nice ways of modifying the front of the car to something more sporty or more like GT350 but without spending a fortune and making it nice... any ideas would be great.

koko

[stlwagon]

Welcome to AFM... The Classic Mustang forum should help you.

[Sore Pancake]

Welcome to AFM!

[GTS 5.7]

Remove the pony,corral and the bars that go to each side of the corral,then you have an "empty" grille.Then get a fender emblem-mount it about 1/4 of the way from the driver's side end of the grille,and there you go.For a bit more,get a Shelby scoop on put on the hood,or for even more $-but looks better,get a fiberglass hood with the Shelby scoop molded in

[1modstang]

Ive got a 65' mustang and we ended up taking out the front grill, lowered it and put in a bullit grill. Looks way sick, crome it out and it will look like a BAMF, not many coupes have it... mostly just the elenor kits on fast backs.

[67stangcoupekid]

also you could take the front bumper an factory apron off and put on a R-type front end they cost about $220.... thats what i have on my stang ... as you can see in my avt. pic

[koko_pebble]

Originally Posted by 1modstang

Ive got a 65' mustang and we ended up taking out the front grill, lowered it and put in a bullit grill. Looks way sick, crome it out and it will look like a BAMF, not many coupes have it... mostly just the elenor kits on fast backs.

do you have any pics??

[The Greek]

Check your local laws before taking the front bumper off. Here in Florida it's against the law to not have a front and rear bumper.

I myself want to modify the front valance similar to the Shelby. Will post what I come up with. I'd rather modify than spend the amount that they want for the fiberglass piece, even though the Shelby part does look real good.---Chuck