Ford Mustang Forum banner

Putting the Front End Back Together

593 views 3 replies 3 participants last post by  zeeth 
#1 ·
I'm to the point of putting this 67 back together. Got the fenders back on but now I really need a diagram of how everything goes back together. A diagram of everything from the radiator support forward would be really helpful but I can't seem to find a decent diagram. Is there such a thing out there ?
 
#2 ·
I have a '68, but the '67 is almost the same. Generally start from the center, go forward, then out. You have to get the hood support in first, before the grille. Also the small support brackets for the front sheet metal. It is like putting a puzzle together.


There is a good diagram in the Ford Manual, section 17.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top