[tylerd_red]

I've got a 71 Grande Coupe that has front disc and rear drums. I was wanting to go with all disc setup and looking into the vintagevenom kit for the rear. Just wondering if I order the rear and get the suggested 94-04 cobra brake rotors would those rotors fit the front of the car as well with the stock disc brakes?

[andrewmp6]

Id rather buy from cobrabrakes vintagevenom has a huge spacer between the front hub and rotor that looks very unsafe.I doubt the 94 rotors will work with your front cailpers there too fat and too tall.

[tylerd_red]

I think I am going to go with the suggested cobrabrakes in the rear but any options on what I could do up front?

Anybody know a place to locate 71 drum spindles and hubs?

[andrewmp6]

Or you could get wilwood there about the same price as baer Brakes 65-73 Mustang at www.hotrodsusa.com Online Store Home. ask Perogie Enterprises Home Page he should have them or Easy to instal brake kits

[blue72mustang]

I went with the Baer 13 inch front and 12 Inch rear install.

[andrewmp6]

Blue the baer brakes you have are the same thing the cobra brakes i showed him are.There both pbr only things different is the names on them and price.

[blue72mustang]

Yes, you are right, the calipers and disc are the same, but the mounting brackets are different.
I have had mine installed for 5 years now.

They work great!

[andrewmp6]

They do work great my friend has them on his 68 it stops great.

[tylerd_red]

If I did cobra brakes in the rear they seem like they would work because it has drums in the back. But the front had OE Disc, how or what would be the best way to replace these? Hopefully with something such as a cross drilled rotor

[72 fastback]

I have a set of 1972 front drum brake assemblies complete with spindles and all. PM me if interested.

[blue72mustang]

Any of the aftermarket brake kits will replace your stock front discs.
You just have to decide how big of wheels that you want to run. Some kits will only work with bigger rims.
If all you are looking to do is replace your rotors with cross drilled ones then just order a set of rotors.

[tylerd_red]

Thanks blue 72. That cleared up that for me

[andrewmp6]

On like wilwood brakes there brackets have two set of holes ones for drum ones for disc spindles.Yeah for rotors look at ssbc i think has a set for it.