Rear seat to trunk divider for 67 Convertible

joef21 · 03-24-2009

Do anyone know where instructions for installing the trunk divider for a 67 convertible can be found. Does it go behind the well liner or next to the seat frame and how is it installed

Thanks

Joef21

rodbender · 03-25-2009

Well sir what you need is a shop manual. I don't recall convertibles having them. I thought it was coupes only and I believe they were in behind the seat.

joef21 · 03-27-2009

Thanks, but they do have them for the convertible. I will double check the service manual, but I don't believe they cover this.

rodbender · 03-28-2009

I looked in my 65 shop manual and came up with nothing. I recall seeing the blow out pic somewhere. Your talking about the cardboard piece right?

Ivy66GT · 03-28-2009

I am not sure on the '67, but the only thing between the back seat and the trunk for a '66 convertible is a screwed-in, mostly horizontal sheet of vinyl called the well liner.

joef21 · 03-30-2009

Correct, it is cardboard. If you ever run across it again,let me know

thanks

rodbender · 03-30-2009

It goes between the seat back and the "header" panel behind the rear seat.

joef21 · 03-31-2009

By the header panel, I assume you mean the panel the top rear seat hooks on to. If this is the case how about the hydraulic line brackets and hoses. these would interfere with it. Would you have a picture of this installed.