[Warrior 2011]

Ok so i am going to put an edelbrock 4V carb on my '68 289. I have an edelbrock performer 289 intake manifold (#2121) and an edelbrock performer carb. It says i need a throttle lever adapter, and i need to modify my fuel line from the fuel pump to the carb. Is there anything else i need to get or do to properly install this carb?

[429ragtop]

get the edelbrock heat insulator gasket if you dont already have one.

[Warrior 2011]

i think i have one of those. do i need to get a carb spacer? ive heard of people installing the carb and the carb having issues clearing the valve covers. I have the finned "mustang" valve covers.

[rapid]

You should not have any clearance issues with the valve covers or the Performer intake. If you choose to go to a taller intake you may have clearance issues with the hood.

[Warrior 2011]

ok thanks i didnt think i would have issues but i want to make sure before i get into the project.