[soperjerk]

Hey all! I just purchased a 200ci engine that has had several upgrades done to it including a Weber 2-bbl carb. I am new to carbs and learning as I go so my question might seem ignorant to you but here goes....The description for this carb says that it has an electronic choke. I can pretty much figure out that means I dont have to connect the choke cable but is there any electircal connections needed. Thanks for any help.

[Ranger1]

I'm not familiar with the Weber, but on the traditional Holley with an electric choke there is an electrical connection that must be supplied with 12V switched power. Look for a metal tab on the choke that will accept a female, push on, electrical connector.

[oldfordguy1]

Just make sure its key activated power and put in a small fuse for insurance,

[soperjerk]

OK. So if it needs to be key activated power could that power come from the distributer? I only ask cuz the distributer on this has both a red and a black wire, where the original had only the black wire.