[rpmcarter]

for a 351 Cleveland!

Just bought an engine and need heads ....seems Jegs and Summit like Chebbies most.

[thetvirus]

http://vichubbard.com/search.php?mode=search&page=1

[dodgestang]

So you bought a block then....not an engine?

Otherwise...what happened to the heads that were on the engine when you bought it?

[2Manystangs]

well what do you want 2V, 4V or the new 3V? Check Ebay, lots of them there

[cindys_sn95]

jegs and summit both have the edelbrock heads for clevelands. very nice street head.

[HPaddict]

Hey rmp I have the heads for the 351 cleveland (4v)
Let me know if you would be interested in looking at them.

[rpmcarter]

Originally Posted by dodgestang

So you bought a block then....not an engine?

Otherwise...what happened to the heads that were on the engine when you bought it?

seems a temper, hammer, and a chisel got the better part of the previous owner.

[rpmcarter]

Originally Posted by cindys_sn95

jegs and summit both have the edelbrock heads for clevelands. very nice street head.

I looked I must have not looked very well......I didn't see much for a Cleveland. I'll check again.

[cindys_sn95]

jegs part # 350-61629

[rpmcarter]

Thanks....I'll look that part number up.

[rpmcarter]

Thanks HP.....we'll try to get those on next week and get her cranked up!!!

[mycoses]

Edelbrock cleveland aluminum heads are a good bang for the buck. They fit 2V intake and 2V exhaust manifolds. CHI heads apparently only fit CHI intake manifolds