[boise1967]

I know there are a bunch of posts about this already, but I need a list of the parts I will need to swap out the front brakes to a granada setup. I have the spindles, discs, calipers, pads, and brake flexible lines. What in addition do I need to complete the setup? I also don't have the caliper mounts so need to know where I can find them also.

[dgt1972]

Seen the calliper mounts on Ebay.

[RF Mustang]

You will also need to swap your master cylinder from a drum/drum type to a disk/drum type. Plenty available from most any one. You will also need to add a proportioning valve or just swap your distirbution block out altogether for a combo valve (distibution/proportion valve) You can get them from most mustang supply shops or try CSRP or abspowerbrakes.com

[boise1967]

Anything else as far as lines, etc., rod end??