[NiceMustang]

Hi, this is my first posting so please excuse any oop's!

I'm in the process of installing fog lights in my 67 convertible. I purchased a kitting of parts from Dallas Mustang and everything looks great. The only problem is that I don't know where to properly route all of the wires, where they each plug in to, where the circuit breaker is supposed to go, where the switch should be correctly mounted, etc. in order to be done as it would have at the dealer.

Can anyone help me with 1) a description or 2) some pictures to help me out?

If this is covered in some other place please just direct me there. I searched but couldn't find anything.

Thank you!

Dan...

[Twister]

the problem is that a 67 stang underdash wiring loom is specific to engine, if the car has a tach, and if it has foglamps. a new loom costs about $500 . I sugest getting a 67 wiring scematic and taking a real good look at it to try to figure out the best way to hook it up. if you can't, or do not feel compfortible, please take it to the best electrical shop in town. one idea that I have always wanted to do to a 67 is to make the foglamps the parking lamps and run brake ducts through the factory parking lamp holes! (ok, I love to push cars to the limit )