[gt350driver]

I just picked up a stock tachometer for my GT350 project car and am having difficulty in finding a definitive wiring diagram on how to connect it. The tach has (1) BLACK and (1) RED wire coming from it. I found some documentation that states one wire goes to 12v Ign, and the other to the (-) terminal on the coil, however the picture that went with this description shows the connection going to the (+) terminal. Which wire goes where? I don't want to hook it up incorrectly and burn up the tach.

thanks,
steve

[jay67fast]

GT350DRIVER,
Check your private messages.
jay67fast

[64 Mustang Mike]

From the ignition switch to the red wire of the tach black wire to the ballast resistor to positive side of coil. I am attaching a drawing (if it works)

[Bluetrain]

Steve, I know this is going back a ways, but did you ever get your tach properly connected? I'm having troubles geting the right information myself.
Thanks,
Lloyd

[nickgt350]

What color wire comes off the ignition to go to the red wire on the back of the tach thanks Nick