Here's a great way to upgrade your Ford Mustang's appearance and safety at night. Diode Dynamics' LED replacements are a great additions to any Mustang's tail lights, and can be easily installed, plug-and-play. No resistors or anything needed.
Diode Dynamics offers the brightest, highest-quality bulbs on the market. Your order will ship same day, and we're here if you need us for support and service. These LED bulbs are designed by our engineering team here in St. Louis, and every bulb carries with it a three-year limited warranty.
Brightness
HP5: (92 lumens) Slightly lower brightness than OEM bulbs, but still provides the crisp, modern instant on/off of LED technology. HP36: (210 lumens) Slightly higher brightness than OEM bulbs. XP50: (410 lumens) Much brighter than OEM bulbs. These are bright!
Bulb Design
HP36: Full 360 degree illumination with 36 High-Power Samsung LEDs. Aluminum base for optimum heatsinking, and non-polar design for easy installation.
XP50: Each of the four sides of this bulb contains two 5W-rated chips, and the top is fitted with two more under a projector lens. Housed in an aluminum casing with textured finish for maximum heatsinking properties.
The bulbs use an exact terminal and will fit as a replacement for stock incandescent All bulbs use less power and heat than the stock bulbs, and will last longer than your vehicle. Our LEDs use only the best components and are of the highest quality. The bulbs are designed for exceptional heat dispersion, and a diode is implanted to protect the LED from reverse polarity or voltage surge. The LED is wired for 12V operation, the kind found on all vehicles.
Diode Dynamics' products come with a 30-day satisfaction guarantee and a 3-year limited warranty.
Hi Nick, do you have LED lights as replacement for turn signals for 2010 GT's? I want to change the red braking lights to amber indicator through one of the reverse lamp slots.
Cheers, Carl
The LED reverse lights I purchased from someone else sucked, they would flash for a milisecond and go off, leaving me with no reverse lights. So My reverse lights, taillights and front turn signals are all OEM bulbs instead of LED.
Not knocking your product or the product of some of your competitors. The lighting appears brighter than OEM lights. In some cases too bright.
My main reason for posting is to suggest anyone thinking of purchasing these lights check their state laws before installing them, especially the lights that put out a blue glow to them.
Running blue lights on a non-law enforcement vehicle in SC is illegal. Many drivers have been ticketed and told to remove the lights.
We don't recommend installing blue lights on any external light locations, especially in VA (one of the most strict states)
We also offer a variety of brightness options if you prefer the OEM levels of brightness. Keep in mind, some of these pictures were taken prior to us having a professional photographer on staff. We try to give the most accurate portrayal of our products in these pictures, but lighting can be difficult to shoot.
The license plate LEDs will be legal in all 50 states, and our cool white does not have a blue hue to it
I check the web site as I would like to replace the back up lamp, in my opinion stock is not bright enough, and there were none listed. I have a 2014 Mustang V6 Premium. Any help would be greatly appreciated!
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Related Threads
?
?
?
?
?
Ford Mustang Forum
3.7M posts
229.4K members
Since 2001
A forum community dedicated to Ford Mustang owners and enthusiasts. Come join the discussion about performance, builds, modifications, reviews, engine swaps, classifieds, troubleshooting, maintenance, and more!