[streetstang]

Just wondering if anybody has install a set of mini tubs in a fox body with coil-over conversion on rear? Getting ready to order a set from wolfe race craft. Any idea on what spring rate and length to start with.

[FREAKNAZTY]

talk to a place called "texas hot rods" i know they build rollers and complete foxes now as far as anything to do with tubing there you got me man

[stang8885]

a good place to check with is auto weld chassis.they even give you instructions on how to do it and make it perform like it should.good luck not bad to do just need basic skills and welding skills

[stang93mustang]

This was sent to me and it has alot of information as far as spring rates/ set ups. Hope it helps you.

[blueracecar]

let us know how the wolfe racecraft stuff works out.i have heard a lot of good things about them.i have a set of their lower control arms and getting ready to install them this offseason.a mini tub and coilover conversion is on my list for next year.

[limp1969]

I have the wolfe craft, mini tube and sway bar set. also have the strange coil over with relocation bar all from wolfe. Car is on the lift and I am ready to install. I got a rear end from strange shortened 3 " total. Got wheels 15 x 12", the rear frame rails will need to be notched but everything looks like it will fit. I will post as I do the work. Its a 90 gt. I have wolfes adjustable lower control arms with the hiems joints. This is a must to clear the wheels. The engine is a dart block with all great stuff heads flow 380 cfm, The engine was built by greg at mckeown motorsports and dynoed on motor at 780 hp the engine is set up for nos. Should be fast
http://i52.photobucket.com/albums/g5...DSC_0034-2.jpg