Hows it going everyone???

I was curious to see what people run in the 1/4 mile. Let us know what you drive...year/make/model etc.
( You can even list the mods )


It will be interesting to see what people run..................

Ummmmm.......how 'bout a link?

91 LX 118K stock motor and electronics, w/Incon Twin Turbo 10lbs boost, 42lb injectors, 75mm meter, 65mm TB, All smog system on including cats, daily driven, 12.40 @109, 1.70 60ft

Thats on 26 x 8.5 slicks stock suspension. Should be 11.40, but injectors are to big for stock heads and found out I had bad head gaskets.

Will be back with ported Trick Flow heads 1.7:1 roller rockers, Edlebrock RPM intake. Should be low 11's maybe high 10's. 10's may be stretching it a little will see.

Tony B.

Look forward to seeing how you do justinlx.

I figured I should have my 1/4 mile time, since this is my topic.

97 Cobra, A-trim 5 lbs, 36 lb. injectors, 80mm C&L, JMS Chip,
3:73 gears, & Steeda Aluminum Radiator.

Ran a 12.68 @ 110 mph

I am working on getting the blower upgraded to an S-Trim w/ 12 lbs. of boost. Looking to get some where in the 11's.

NICE, Low ET GT!!!!!!!! Warn me next time you put a link up that I will need a bib around my neck for all the drool

That is a beautiful car! Much like the 86 that I owned a few years back.

My current project is a 2000 V6, which runs 14.86 stock with a few tuning adjustments. It is a fun car to play around with in the twisty's.

2001 GT Coupe, 4.6L with MAC cat back and H-pipe w/ cats, MAC intake, JET power module, Steeda shift kit and 3.27 gears......13.4@103 mph. I haven't had the car dyno'd yet, but it feels like about 300 rwhp. Should I be getting faster times?

Mustang Mike.....

Are you having alot of traction problems? I know that a 2001 corvette was at Carlsbad raceway and he was running 13.8's@101mph.

I would have to say it sounds about right. The Corvette had no problems hooking and still ran 13.8's.

But all cars are different!!

I AM RUNING A 15 FLAT ON A 91 GT STOCK THE ONLY THING THAT IT HAS IS A SHORT SHIFTER AND CUTOFFS,IS THAT GOOD OR BAD?

what does a 97 GT with AODE run in the 1/4? i havn't checked mine out yet.

Our Stang:1982 coupe with 1987 front end,4" cowl hood,351W .020" over,Eagle rods,stock cast steel crank,JE 13.1 pistons,Cam Motion custom grind solid roller , Milodon gear drive,World Products Windsor Sportsman aluminium heads ,305cfm in and 201cfm ex,2.02 1.60 Ferrea stainless valves,Comp cam Pro Magnum Roller Rockers,Vic jr. intake ,BG race demon 975cfm carb,Mac long tube headers 1 3/4 primaries and 3" collectors into 3" exhaust and Dynomax race mufflers::: 580hp at 7300rpm and 478 lbs of tq at 6000rpm..C4 Dynamic Converters trans and 8" torque,8.8 diff with axles spool girdle 4.56 gears,28x10.5x15 MT slicks.3000lbs with driver.
Best ET is 10.64 at 132.7 mph and best 60ft is 1.6 ,,sucks but working on it,if it hooks she should see high 9.9s flat 10s


Tom...www.tkmotion.com...514-920-0094...Porting...Flow Bench...14 NHRA Records!

[Quick4.6]

'98 Mustang GT 5spd
K&N Air Fliter, Mac Cat Pipe, Flowmasters
stock 2.73s

best E/T: 14.51 best trap:96.9 best 60ft: 2.3

I haven't run it with the T/A in yet.
The 14.51 was in 25 degree weather with lots of tirespin, and the trap speed was on my old burnt out clutch. I'm hopefully going racing on friday and beating both my best e/t and trap.

[JUSTNLX]

Good Luck and be safe!

Let us know how you did

2001 GT five speed. Haven't had it on quarter mile track since mods but ran a 13.89 bone stock on street tires with terrible 60 ft times. Since then I have put k and n fipk, delta flow 2 chamber flowmasters, flowtech X-pipe, and a tuned diablo chip. I have no clue what it will run now but it fell a lot faster.

12.75 @ 109.84 on 87 octane and street tires exactly as it came in off the street.

i got an 85 stock gt hatch. Anyone know the quater mile time for this car stock? if not...know where i can find it?



scott