Hit Low 14's Today!!!

93mustang · 06-25-2006

Finally got my car in the low 14's!!
And replacing a failling MAF Sensor was a large part of it.
If your car is running like crap, check your MAF Sensor!!!!
What a difference. My car runs so great now!!!!

Reaction.........017
60'................ 2.041
330'.............. 5.916
MPH1............76.53
660'.............. 9.178
1000'..............11.96
MPH2............ 96.14
1320'............ 14.319

1993 GT Mustang / Stock 302 EFI / Edelbrock 5.0 Upper and Lower Intake / 75mm Throttle Body / C&L Cold Air w/76mm Mass Air / K&N Filter / Electric Fan / BBK Underdrive Pulley's / A.C. Removed / BBK Headers / Flowmaster / H-Pipe / T-5 / Alum. Driveshaft / 3.73 Gears / Eaton H.D. Posi / Moser 31 Spline Axles/ Subframe Connectors / Line Lock / Driveshaft Loop / B&M Short Throw Shifter / 16" Chrome Cobra Wheels / Nitto Drag Radials Rear / BFG G-Force Sport Front / Racing Upper and Lower Control Arms / Lakewood Adjustable Drag Shocks/ Holley 190 lph Fuel Pump / Holley Adjustable Fuel Pressure Regulator / MSD EFI Blaster Coil/ Stock Heads/ 19# Injectors

Darkside77X · 06-28-2006

Not bad, but ive got alot less mods on my car and run 8.30s in the 1/8..

93mustang · 06-28-2006

Wow. 8.30 in the 1/8. What are your other time intervals in the 1/8?
What are you running for a setup?
Stock heads? Supercharger? Slicks? Stock 5.0 Motor?
I'm running a stock 5.0 motor with 125,000 miles, stock heads.

93mustang · 07-04-2006

Originally Posted by 93mustang
Wow. 8.30 in the 1/8. What are your other time intervals in the 1/8?
What are you running for a setup?
Stock heads? Supercharger? Slicks? Stock 5.0 Motor?
I'm running a stock 5.0 motor with 125,000 miles, stock heads.

Darkside77X
I dont have a timeslip, i threw em out along time ago.

60 foot was like 1.7
half track 5.44
1.8 -8.3XX @ 85.5 mph.

The car has a cobra intake,E-cam, some worked explorer heads, bbk cold air intake, elec fan,under pulleys,ngk plugs,frpp 9mm wires,msd cap and rotor,king cobra clutch,front sway bar removed, wide n skinny welds,MT ET radials, mac upper control arms..and im probly forgettin a thing or 2