Ford Mustang Forums - View Profile: 94' cobra 351

About Me

Real Name: Ryan R.
Occupation: U.S.A.F.
Location: Chicago
State or Province: Illinois
Country: United States
Interests: Sports, cars, traveling.
Pet Peeves: chewing with your mouth open.
About Me: Heading to Ramstein Germany
Mustang Rides: 1994 COBRA Mustang

Started with a 351 w m stamp block 2 bolt main bored .30 over

crank was cut and knifed

keith black pistons were installed along with seal pro rings

gt 40 heads were ported and polished and had all gaskets port matched then sent out to be flow tested, fitted with 1.6 and 2.02 valves which were treated to a 5 angle valve job and all new springs along with crain 1.6 roller rockers.

There is a custom grind ultradyne cam in this car with 292-292 duration and 512 lift max rpm at 6200

the lower intake was sent out to be extrude honed and also gasket port matched.

the upper is a comp cams poly intake, with a 1 inch spacer

75 mm throttle body as well as a 75 mm pro m mass air and conical k&n filter

There is a center force dual friction clutch as well as a ford motor sports flywheel which mounts to the trans.

A accel fireball ignition and coil as well as 8.8 wires

Age: 22

Statistics

Forum Posts

Posts: 116

Posts Per Day: 0.11

Find all posts by 94' cobra 351

Find all threads started by 94' cobra 351

General Information

Last Activity: 03-02-2009

Joined: 01-20-2007 Member Id: 40532

Referrals: 0

94' cobra 351's Profile

Apprentice

About Me

Statistics

Mini Statistics

Group Memberships

Recent Visitors