Well I ended up making my own, at least for the side with the spring clip. I took a plastic air fitting and pressed the metal sleeve into it. I then used a grinding wheel and took off enough of the plastic so that the spring clip could be snapped back on the motor shaft. I also had to grind down the plastic to a diameter which would allow the arm to slide over it. Works great! I still cannot figure out how to take off the other side that has what looks like a knob instead of the spring clip. Does it pull apart or what? If I can get it apart I can make a similar bushing for the other side and hopefully get this thing squared away. Anyone know? | 
Need Wiper Linkage Bushings 1975 Mustang ll 
