[76steve76]

Your response is appreciated!!!

Currently I am doing a T5 swap in my 76 Cobra. I purchased a Quicktime 6053 bell housing which is very nice and the absolute best option for the swap. There is only 1 snag, the pivot bolt is in the same position as a Mustang II bell housing requiring a 75-78 fork which I dont have.
I am working with Ross of Quicktime to use a FOX body fork which is easy to find. The question to all of you.. If you were doing a T5 swap in you Mustang II would you want to use a II fork or a FOX fork.
I will be taking some measurements to see if there is any interference using a FOX fork and relaying your input and photos back to Quicktime.

Thanks in advance

Steve

[VAMP_77]

ACTUALLY, i'd like to be kept in the loop on this one. My 4spd is a lil lacking above 90mph lol. Steve, if you ever get this done. Would you mind sending me a list of what is needed ( besides a t-5 ). Like i said, 77 mustang Mach I 302 with a 4spd.


thanks Jim

[76steve76]

Quicktime actually has 2 versions of the 6053 bell, 1 uses stock II flywheel and fork the other uses 157 tooth and fox fork.
The II version is on clearence because most people (like me) dont have the II parts anymore,,its $250.
www.quicktimeinc.com
Steve