[Halsparks]

Hey everyone. Does anyone know where I can find a replacement flywheel for the stock 4-speed transmission in my 302 Mustang II? I haven't had any luck on Google. Also, if I decided to do the t5 swap, what is involved for this car?

[74stang2togo]

Nobody has them in production anymore, you'll pretty much have to hunt the internet for one, Ebay, Craigslist, MustangII.net

A good used one that can be turned will work.

[Lamonte_1993]

is the flywheel bolt up different in the mII crank than the other windsor blocks? I want to put a 4 speed back in mine so im interested to know, i was just going to find an old 4 speed and try to beat out the floor pans some to mae it fit, but if it wont mount to the crank then im in a whole nother ball game.

[Lamonte_1993]

i might as well just either replace my crank (which i dont want to do) or motor, or deal with the c4, seeing how i can count on two hands the mustangs II's ive seen in real life, and only three of them were v8's, including my own

[76steve76]

Quicktime has a bell that uses the fox body 157 tooth flywheel and fork ( specify when ordering) for your t5 swap . I am putting mine in now. It is what I used because the small II flywheel and fork are not available.