[gdiwicker]

Hey All,
I have a 74 mustang that needs a rag joint. I've found kits that have parts I don't need so I need to know the dimensions of the rag joint itself so I know what rubber disk to grab at the parts store. If you have the dimensions or the part number, please hook me up.

Thanks,
Ryan

[nigel]

Welcome to the site. The best way if your not sure is to take your old one off and take it with you.

[hydroflame]

if was like mine it was no longer with us i think if you go to autozone or advance its in there help section 34001 or 35001 i'll check it has all the part you need to replace your current one. Now if you have a real parts store like a napa try there i know when i ask the big box store type it dint show on there computer so they didnt have it, even though it was haggin on the shelf lol

[76steve76]

Are you opposed to an upgrade?
Flaming river universal joint at summitt racing.
http://static.summitracing.com/globa...1716dd_w_s.jpg
Im not trying to plug the store but this will give you some more header room and a nice clean look.

[NECobraII]

Ryan,
Were you successful in replacing your rag joint? I'm kind of in the same boat but a different problem, hoping you can help me out. Replacing the rag joint on my 1976 cobra II. I've managed to get access to the joint, remove the 2 bolts, and swing the arm down. My question to you is how did you remove the 2 "rivets" that hold the two brackets on? I've heard of people drilling them out....Any method you found successful or easiest? What did you use to replace these two "rivets"? Thanks, Travis