WHERE Does This Vacuum Hose Go?? (pic)

Elwood · 10-02-2007

Hi Everyone -

I bought this Cobra II (302) and had the carb rebuilt. I'm putting it back together and I've come up with an extra vacuum hose (wtf?). I can't find anywhere where it would go. I've attached a pic which should clearly identify which one it is.

While I haven't done any adjustments (I will), I did take it around the block and had some stalling issues (which is one reason I had the carb rebuilt). I also had transmission shifting issues. Is this hose the one which controls the tranny (A) shifting?

Please, please let me know!

Thanks in advance.

Green78II · 10-02-2007

That hose goes from a Vacuum canister in the fender to the carburetor. Check all around the base of the carburetor and intake manifold for a bare fitting. Thats where it most likely came from.

I'm not really familiar with transmissions but I think it could be the clutches your tranny are going bad.

78cbraii · 12-26-2007

Cant see where its coming from in the pic. If it is coming from underneath the firewall along the transmission it most likely is for the transmission.