 Any Ideas of what HP I could be making?
Can anyone make a guesstimate of my hp? I know this is really impossible to measure without a dyno. The reason I am asking is because I am trying to match my injectors to my HP and future mods.. Here is the state of my Mods.
I know some are not HP parts, I just have them listed in annother signature..
Thanks for any responses,
Guch
Pro M 77 MAF, 65 MM TB , Vortech V2 SQ , B303 Cam. Ford Motorsport ceramic Shorty Headers, 2 1/2 MAC tubes into 2 chamber Flo Masters. Stock 19 LB injectors. Vortech BTM , Vortech FMU, Vortech pusher pump.BBK adjustable Fule pressure regulator set at 60LBs , Autolite 24 1 heat range colder plugs 160 thermostat. Timing set at 8 degrees. Auto specialties underdrive pulleys, MSD TFI coil ,9 MM wire set, 3.27 gears. JBA subframe connectors, BBK Racing springs 1 1/2 inch drop, Koni Sport shocks , Nitto Drag radials 275/45/17 , Hurst short throw shifter. Royal Purple fluids, Redline water wetter.
__________________ 91 GT 5 speed: Pmas Velocity MAF, 65 MM TB, TFS Track heat upper and lower. TFS TW heads and stage 1 cam, Kirban fuel pressure regulator, Summit 42lb injectors, 255lph in tank, T-rex,Ford Motorsport Ceramic coated headers, Magnaflow 2 1/2 cat back, summit O/R H pipe. 3.27 gears, BBK Race springs , Koni Red shocks. JBA weld on Sub Frame connectors. Dugan Racing 4- point roll bar. Hurst short throw. Vortech V2 SQ @11lbs. and Nitto 555 255/45/17 front, and Nitto 275/45/17 | 
