while swapping out lower ball joints on my FOX coupe I realized I have a wobbling hub on the pass. side. I know that on the stock FOX, the bearing are the problem and all that has to be done is to put in some new wheel bearings. I, on the other hand have done a 5 lug conversion using everything off a '95
stang. if I'm not mistaking, on these cars you have to swap out hubs, am I correct? so...with that said, I have an extra pair of spindles, hubs, rotors, brackets and calipers laying in the garage right now. can I just swap out one of the hubs???
wheel hub interchange 
