[96greenGT]

Ok ive been wanting to istall some fog lights that will have that nice factory look. My 96 is one of those deleted with all the deleted options, (meaning no power, no spoiler, and of course no fog lights). I was wondering if the installation of a fog light kit is a big pain in the butt or can it even be done?

If so i would also like to know some websites that carry these kits from you guys, i would prefer some clear ones that would go with my clear headlights.

Any help is apreciated......

[JUSTNLX]

I'm not sure about the 96 Mustang, but the Fox chassis have the wiring already there. All you have to do is Get the switch and lights and plug it all in.

My parents Windstar was the same. We just bought the lights and switch installed them in the stock locations and turned them on!

I'm sure the 96 Mustang is the same

[leestang]

I think justin is right. We bolted my old ones off my 96 that I used to have on a 98 v6 car and the holes are already there. you might have to buy the clips that the bolts screw into. My buddy's 98 ...we went a little different and stuck some different bulbs and wired up a different switch.