First of all I'm new to the mustang thing so if I sound ignorant it is because I am. Recently I had the
tranny in my 94 gt pulled and rebuilt (torque converter and a few drums and bands). When the
tranny was put back in it caused a few problems. First of all the car will not start in park, only in neutral. Secondly the car now will not start at all unless you directly connect the battery to starter to start it. I tried disconnecting the battery but that seemed to do nothing. To further the problem the car has a code alarm in it (junk) and that seems to be acting up also. Before the
tranny rebuild I had none of these problems. I already replaced the connector (for the power) on the starter as I've heard these usually go bad, but it wasn't the problem. I know this is very long-winded but I am truly confused here.
TIA
CJS