[89gteddie]

I have been thumping around on the internet and i am in desprat need of a upgraded cooling system. im am sick of just watching that temp climb. well we have some choices that i need help with. I did the finding now give your opinions. the car is a 89 gt 5spd. vortech t-trim and other boltons excpet for heads and cam. thanks alot for the help.


Be Cool ??? http://www.jegs.com/cgi-bin/ncommerc...89&prmenbr=361

Evans ??? http://www.evanscooling.com/main3.htm Price $912.00

Fluidyne ??? http://www.brothersperformance.com/s...hp4432093.html

or list other good replacement radiators.

[rbohm]

fluidyne makes some good rads. be sure it has 16 fins per inch, and 2, 1" thick rows if you buy an aluminum rad. i prefer copper/brass rads my self 3 rows thick. run a good electric fan that pulls a minimum of 2700 cfm, and get a good water pump from a place like stewart components or brass works.

[djsommer]

I had a problem too, but I installed a bigger radiator (3 row), a quality waterpump from a local parts store (lifetime warranty!!) and a Proform electric fan that flows 2700 cfm...did the trick.

[JUSTNLX]

Being Blown, do yourself a favor before throwing money at it. Do a leak down test to check for blown head gasket.

I personally will not by a thing from Be Cool again. Their water pump actually made my turbo LX run hotter. Plus it was the same pump you can get from Kragens with a plate rivited to the impeller.

[5literChevyEatr]

i have a fluisyne rad, 160 thermostat, and a flex fan, in traffic with the ac on i stay at 160, the ford racing three core works just as good, it made me 10 degrees higher, i just liked the fluidyne look