[iroc-z]

Need info on how to program a new remote on my 1996 GT convertible. I know that we should remove the left hand quarter panel from the inside of the trunk. I am supposed to find a two pin connector (program connector J4) taped to the wire assembly, it`s suppose to be in clear view but i can`t find it. I have to short the two terminals of the program connector J4 to program my remote.
Anybody knows where to find this connector? Any other ways to program a new remote?

[mwarrior]

I'm not sure if the '96 works the same as the '99-up. But what I do is turn the ignition (not car) on and off I believe 8 times, as soon as you hear the locks lock (or maybe it was unlock) themselves, press the "Lock" button on every remote you need to program. Start the ignition, back off, and try the remotes. Hope that helps.
Gagan

[mustangtk]

I checked a Ford manual it says the connector is next to the Remote Keyless Entry module in left rear corner,it might be on the backside of the main harness. Ford never makes anything easy to do, that's from the mouth of Ford tech