[86stang96]

can somebody give me the base horse power for a stock 460efi motor all stock including manifolds i searched google but couldnt find it thankyou all for the help. as well as what kind of trannys can i use manual and auto i would like to have od

[hotwheels]

460
Produced from 1968 to 1996.

Available in Ford, Mercury and Lincoln.

Same as 429, but with longer stroke. (3.85 inch)

During its earlier years, pre 1973, horsepower was rated at 365. After 1972 horsepower ranged from 208 to 275.

Intake/exhaust valves are 2.08/1.66

Intake/exhaust valves for the Police Interceptor 460 heads (from 1973-'74) measure 2.19/1.66

[JUST A MUSTANG]

Originally Posted by 86stang96

can somebody give me the base horse power for a stock 460efi motor all stock including manifolds i searched google but couldnt find it thankyou all for the help. as well as what kind of trannys can i use manual and auto i would like to have od

Im certainly not an expert on this but I have owned a 78 460 Lincoln Town Car. If you read more into the 460 stories on varioious years and models, I have been told the internal of the 460 truck engine varied greatly from the 460 car engines over the years.

Read all the cam specs, bore and stroke specs, and valve specs...and then...read more and more...

I know the question is kinda broad in its apprearance but the answer is even more complex after some digging around.

http://www.cobrakit.com/Engine/Princ...cessThumbs.htm

Here is a link to a real HOT ROD version of the 460..hope this helps.

[JUSTNLX]

Originally Posted by wyominghotwheel

Intake/exhaust valves are 2.08/1.66

You're not going to believe this, but the intake valve on a EFI 460 is only about 1.94. I know because I just got done putting togather a 514 for my EFI truck. When I removed the heads that little valve surprised the heck out of me. They didn't stay in there long. I had some 74 460 heads that I raped the valves from.