distributor for 302 roller cam

new2old · 03-21-2005

I am putting a rebuilt 302 engine, 1992 w/roller cam, into my 67. I have an issue with the distributor. I am using all my original accessories and bought a new intake and carb. The issue is, I want to have a classic looking distributor and have electronic ignition. I would like to buy this without having to make any mods, i.e. change gears. Can anyone reccomend a product that would "plug and play" in this config.

Thanks

GTRaptor · 03-22-2005

MSD has a fine line of distributors

http://www.msdignition.com/dist_directory.htm

Fordgazm · 03-23-2005

85 5.0 distributor is for a roller cam with a vaccuum advance .

wayne94mustang · 03-23-2005

i had a 70 cougar and i installed a duraspark injntion on it and all i did to keep the look is use the old style cap and rotor on it

justins89stang · 03-29-2005

I personaly like the MSD distributors myself. Thats what I used when converting my 89 to carb. What ever you do just make sure that you have a steel or brass gear on it for the roller cam. The roller cams and cast gear will wear out on each other.