 Attn. all engine swap guru's
I am in the process of swapping out the motor in my 93 4cyl. I am running a carburated 347 and need some wiring help. I need to know how to get power to my fuel pump using the existing wires. I know on a 5.0 efi to carb swap you can jump certain wires in the gray and black connectors on the drivers side. However my new 4cyl only has one brown connector on that side. I do not want to run a toggle or another hot wire, I want to use the existing turn key and arm fuel pump setup. Any help will be greatly appreciated. Thanks! | 
