[GTRaptor]

Basic Load:

Intake air/theoretical amount that enters the engine. It affects where your eec gets timing/fuel values. Say, your at 200kg/hr and your engine can breath 550max.

200/550*100=36.3636 % load

Anywhere you see load (like a load based table) it will be what the computer is calculating.

You can scale load by changing displacement, but all you are doing is making yourself feel better :>)

Not more or less accurate just different...... You could also re-scale your tables if you need a more granular approach. 6 of one 1/2 a dozen of the other.

The scalars build the X and Y axis of the table they represent.

You can do whatever in between just don't mess with the highest and lowest values.

You are correct in that the programming will interpolate anything between the row or column values and if it is past the highest number (like 5000 for RPM) it will keep using the last entry in the table. You might want to tune in those higher areas so you can re-scale your table.