Ok here goes, I just put new O-rings on my injectors which are the same ones for the past 7 years at least, I bought it used. Anyways, the other day when driving, the car had no power and would backfire constantly when i would hit the gas, any suggestions on what it could be. I just put in bbk headers (1 5/8) and bassani x-pipe. Please help....
what year is your car? why did you put new o rings on old injectors. did you clean the injectors? if so maybe you are getting more fuel than your sparks plugs are used to if they are old as well. Do a basic tune up plugs wires cap rotor and clean your mass air needle there is a how to clean your mass air in the tech section
__________________
1966 mustang 302 ho b303, 650 double pumper, t-5 conversion ported e-7 heads, 1.6 motorsport roller rockers, 3:55 posi trac, holley red electric fuel pump. 1994 lazer red 'ol red' very dependable daily driver mostly stock(but not for long)
Sounds like plugs or wires. Is it possible you could have damaged your plugs or wires when installing your headers ?
__________________
1995 Mustang GT - Vert
RHD Conversion, Vortech V2-SQ, 42# injectors, CAPA Chip, 18" BonSpeed Wheels, 3.73 Motive Gears, AutoMeter Gauge Pod, Pedders Springs, Koni Shocks, 13" Cobra Brakes, BBK Shorty Headers
~~ He Who Dies With The Most Toys Wins. But Is Nonetheless Dead ! ~~
i had a friend with an 88 gt that was backfiring like crazy---turned out to be an exhaust leak. i had never heard of that causing backfires before, but sealing his exhaust leak made his car stop doing it
I have found that the backfiring will only happen when the car is cold. Once it has warmed up a little, and ran for about ten minutes or so the backfiring stops. It is possible that a plug didnt get all the way back on.
__________________
88 Mustang Gt
Tremec 3550
Iskendarian camshaft 265/275
Ford Aluminium three core radiator
Vat & Magnaflux block and heads, bore surface and hone block .30 over
grind crankshaft, recondition rods, install new valve guides, valve job
pcv valve grommet, bosch ignition wires, Intake and exhause valves.
Ford 302 engine kit: Pistons,rings,rod & main bearings,cam bearings,fel pro gasket set,3 piece timing set,oil pump and freez plugs,valve springs intake and exhaust