[RED92LX]

This is the panel I bought for my 92 lx 4cyl notchback all power mustang
http://www.americanmuscle.com/foxbody-blank.html

My question is. What is needed to move the wires/computer(I think it is a computer) that is behind the HVAC to the space left by the radio/tray?
I decided to take the entire console out so I could work with more room...and then the sun went down, leaving me with not enough light to work with.
I removed the radio and radio support pieces so there is a ton of room back there, I just want to move those wires down there to free up space so I can mount the new panel flush. The intructions say to use the spacers they provide so the radio will fit at the top, but if I do that the panel won't be flush, it will have a downward angle. Any help and maybe some pic would be greatly appreciated.

Thanks
John

[RED92LX]

Nevermind people I investigated more today.
For anybody who want to know how to move the blue box. All you have to do is unscrew two bolts flip the blue box(it says that is a connector) and rescrew the box back using the same holes upside down and Walla the blues box has been flipped!!
Now I have to grind the panel to fit into the space... I will take pics when I am done(maybe that will spark some interest in this thread).

[lxarlo]

my friend at work just did this, but not with that panel. he just flipped the stock locations of the stereo and hvac controls. he did this so its harder to steal the radio since you will have to get it out of gear to do it. (auto)

[stroked-n-blown]

Hey sorry to bring up an old thread, but I was wondering if you have any pics of that relocation plate in your car, I was wondering if it turned out alright?

[Hooligan]

If you go to this link... Foxbody Radio/HVAC Relocation Panel 1990-1993

There are 4 pictures of it installed.

They also have this one...
Foxbody Radio Relocation Panel (87-93)

That leaves teh HVAC controls in the same spot, but moves the radio up a bit.