[newracerx2004]

Is there anyone that can tell me how to do the electrical of an engine swap into my 1983 lincoln. im going with a 1994 GT and t-5. engine ran perfect when it was pulled but now i get voltage at the coil but no spark. i get no voltage to the injectors, all the relays come on but it cranks for days and never starts. im killing myself with this swap! i want it to run so bad but this is my first swap like this with fuel injection and i dont know what the heck im doing. PLEASE, ANY INFO IS BETTER THAN NONE!!! thanks

[redhotstang00]

I never did a swap before but, what about the computer also make sure you wires and distributor and Ignition Module are good...

[newracerx2004]

like i said the engine was in perfect running condition, i have nearly a dozen computers and modules and control units strung across my car. i know the problem is in the wiring some whereor something isnt connected... but ive plugged together every harness that fitsleaving off all the chassis side plugs which i just taped up and put aside.

[Russ Withrow]

I went the other way with an engine swap, I put a 1991 Mark VII 5.0 in a 1972 Mustang. Call Summit Racing and ask about a wiring harness to match your applicqation, I purchased a harness to put in my 72 and it was quite easy. It comes with everything but the O2 sensor harness. Wasn't real expensive around $250, and I built the O2 sensor harness.

Russ