[KoreanFocker]

I posted this in the 2.3l Tech Forum but didn't get an anwser so i'll try here....

Well this morning my car hesitate at a stop sign and i've noticed that it does do that to me about 1 or twice a week so i decided to run the scan tool in school today...well i was just doing the first test and a Code 10- Snap Throttle came up...my teacher didn't have a clue and before i could do more research at school the bell rang...so any help on this Code 10 crap would help me

Mike

[GTRaptor]

The separator pulse is a single pulse that indicates the END of hard fault codes and the BEGINNING of memory codes.
It will show up as a code 10 on most digital testers.

[Crash!]

During the KOER self test, you are to perform a brief WOT (on and off) for dynamic testing to complete. Depending on the vhicle, you may need to tap the brake pedal and take the steering wheel lock to lock as well.

The code 10 is also a seperator, but is displayed after self test is complete. (Ex. 11-10-11 indicates no faults)