[evildude42]

I've aquiered a 1992 mustang lx 2.3L. Car has lots of problems, but for now i'm concered with this. It is missing the cables that go to various sensors. From what i can tell, its missing the MAF cable, the Coolent sensor cable, and a cable leading to the airbox (two prong port)

Since the check engine light is on (and i did not get the codes yet) i want to replace these cables. My question is, if it as obvious as going to nappa and buying them, then finding the correspondng empty holes, or was there something more devious as to why they are missing.

[The Greek]

I'd go to a U-Pull-It type of yard and look to see if you can get what you need. It doesn't necessarily have to be a Mustang because a lot of those sensors are used on other models of Fords and Mercurys. NAPA may have (Are you refering to vacuum lines when you state cables?) vacuum line in bulk, where you have to make up what you need. Your best bet is to start with the U-Pull It. ---Chuck