 NOS for street heat HCI combo
I was considering a NOS set up for my stang. I have a TFS stage 1 setup , I have seen that trick flow has a intake spacer port for spray. what would I need to do this and what changes to my setup would I have to do? Also what shot(50,75,100) would be safe for this it`s a stock lower end. Is this a good system by trick flow or try something else? better and cheaper?
(See signature for setup)  Trick Flow TFX (TM) Nitrous Systems: TFS-N5150 - trickflow.com
__________________ 89 LX vert. Auto to 5 sp.(t-5WC)Hurst short throw 3;73 rear,trickflow cover. Trickflow HCI street heat stage 1 ,24lb.inject. 70mmbody,75mm prom mass air. shorty headers highflow cats, flowmaster. Adj.fuel reg.190fuel pump. underdrive pullies,cold air fender. blue hose and 3 row radiator, 180 therm. edelbrock high flow,SS fan clutch,blast coil and 6al multispark, blue wires, subframe conectors and strut brace. trunk-no rack, 93 sp.ed.spoiler, cobra R 17, rear disk brakes, G3130amp/alt
Last edited by swpdcop; 02-03-2008 at 11:18 AM.
Reason: added
| 
