[NoSlow5oh]

Alright, I just put a down payment on a used NX 35-150 kit that includes a pressure guage, bottle heater, fuel pressure safety switch, blowdown fitting, and purge kit. I'm paying 550 for it including shipping so I think I got a good deal. I know I need to get autolites gapped at .035 and get them 2 degrees colder, but what part number would the plugs be? What should the timing be set at, say 100 shot. I'm going to start out with 35 pill and work up but when can I go up with the shots? I'm also going to get a rpm window switch and set it from 3000 to 5600 and probably shift at 5400. Does that sound good? I'm also getting a bigger fuel pump, but not for a minute, so would the 50 hp setting be okay untill then?. Fuel pressure is about 42-43psi at WOT, but the FPSS will help me it it drops any. Am I missing anything? Thanks in advance.

[Quick4.6]

sounds like you got a good deal, i'm not sure about the parts numbers for the plugs, but i'd set base timing at 8 degrees on the spray to be safe. i've heard of guys running 75 shots with around 10 degrees, but play it safe, and retard it slightly.