[chelstang2012]

Hi all-

I recently bought a 2000 mustang, with a v6 engine. i was looking to add some power and speed to the car- any suggestions on what would help give me some added speed? I was thinking superchargers, but I am not really sure what would work with my car- any help on this topic would be appreciated.

Thanks in advance

[Old Fart]

I am basically in the same boat (watching for advice/responses).

[ODHGABFE6]

3.8mustang.com

thats about what they cost too.

[ODHGABFE6]

another thing, most people with a v6 like to duel it out, in my opinion its better to keep it single exaust on a stock engine because the bigger the exaust the less tourque youll put out. sounds good but you lose power. i have a 2 1/2 inch single exaust with a 2 chamber Flowmaster and i noticed a big power difference, plus it sounds like a straight piped GT at around 4000RPM. if you supercharge it, you might want to duel it out then. and use an inercooler for the charger.

[nilrak]

If you are interested in supercharging you want to purchase a complete kit designed for your car and one that includes programming of the ECM. If you try and piecemeal one together from various sources or used I think you will have nothing but headaches. I just finished and install of a vortech system on my 02 GT and am very pleased. I believe they make complete systems for the 3.8 motors as well. The best part is that they are designed to get the most out of a totally stock motor. Bolt it on and instant HP gains.

[r17legend]

how much psi can a stock engine take from a supercharger