[92blue5o]

ok well i have a 92 ford mustang 5.0 and all thats done to it is a full exhaust, bbk headers, gt40 upper and lower intake, cold air intake and 3.73's other than that its pretty much stock .I am looking to get gt40 heads and a cam. but im not sure what kind of cam i should get ? and would i need to get anything else for my car when i get the cam and heads or anything else that would help it go better?

[dakine858]

Originally Posted by 92blue5o

ok well i have a 92 ford mustang 5.0 and all thats done to it is a full exhaust, bbk headers, gt40 upper and lower intake, cold air intake and 3.73's other than that its pretty much stock .I am looking to get gt40 heads and a cam. but im not sure what kind of cam i should get ? and would i need to get anything else for my car when i get the cam and heads or anything else that would help it go better?

Yeah man you can do a ton of stuff to your engine to make it faster. If you want to get into some serious power then consider upgrading your internals (pistons, rods etc) to allow for a supercharger. You could also get a turbo kit and keep the psi on the lower side and use your stock internals. Another good option is adding some juice (nitrous), the Fox Mustang's run nitrous very well. As far as cam selection, the Comp Cams Magnum solid roller: duration 288/288, lift .586/.586 would be a good choice.