 70mm TB and wet nitrous concerns...
Hey guys, I have a ZEX wet nitrous kit that I've had tuned and runs really well. I still have the stock throttle body and plenum and am looking to upgrade to a 70mm unit and plenum. My question is do you think/know if this will effect the nitrous mixture as it is going through the throttle body and into the intake manifold.
I guess what I'm asking is will the air flow slow down and be less turbulent (which helps mix my nitrous/fuel and keep it atomized better in the intake manifold) with the bigger more free flowing throttle body and plenum. I just don't want to end up with a problem because I changed my throttle body. THanks for any technical ideas/info.
By the way, my nitrous/fuel jet is in the intake tube BEFORE the throttle body
__________________ Ben Toppi
'01 Ford Police Interceptor - Daily driver
'04 Ford Mustang GT, black, 5 speed, 40 series flows, o/r H-pipe, bbk intake, SCT dyno tune, ZEX wet nitrous 125shot  , MGW short throw shifter, FRPP aluminum driveshaft, Black Bullitt deep dish wheels with 270/45/17's up front and 315/35/17's out back. Goodyear Eagle F1GSD3's. BBK LCA's. Mach1 grill and assorted stainless accessories - My toy
Dyno #'s = 325hp and 420ft/lbs 
1/4 mile= 13.1@110mph w/2.1 60 ft street tires  | 
