[95stangbuilt]

I am getting to used to the power of my pony want to do a big nitrous install
Im not exactly a gear head so i need some serious help and educated opinions
I currently have the following uprages on my 95


-Mac catback w/ 3" stainless tips
-Ford racing 9mm wires
-Pypes 2.5" off-road H-pipe
-3:55 gears
-Spec clutch Stage 1
-Trickflow Twisted Wedge aluminum cylinder heads
-Trickflow Street EFI intake manifold
-Trickflow Street EFI 1" spacer
-Trickflow stage 1 Cam Duration 275/279, Lift .499/.510
-Trickflow 1.6 roller rockers
-Trickflow Chromemoly, 5/16 in. Diameter Hardened Pushrods
-BBK chrome headers
-Mac underdrive pulleys
-steeda tri ax shifter handle
-steeda clutch cable, quadrant, firewall adjuster
-C&L 76mm mass air kit
-professional products 75mm throttle body
-A/C and Smog pump delete
-Aeromotive Fuel Pressure Regulator
-MSD TFI coil
-KYB quad shocks
-Tokico HP struts & shocks
-H&R sport springs 1.6"F-1.5"R
-Steeda caster/camber plates

Is my pony ready for nitrous?

i was wondering was what is the best kit for the SN95's and how big of a shot can my car could handle

I also would like to know how much a good setup is going to cost me, and how much knowledge does it require setting one up

[RLG34750]

since you have a 95 with hyper pathetic piston....

i don't advise more than 100 shot....

this is the kit i recommend......

ZEXâ„¢ - Sorry...

[95stangbuilt]

would a direct port setup work good on a 95?

[RLG34750]

Originally Posted by 95stangbuilt

would a direct port setup work good on a 95?

not worth it for your set up....

[95gts silver/bl]

i used a nx kit on my 95.i also had the 6-plus msd dig. box so you can retard timing.i had a 125 kit with safe timing .i have not used either since i have a sc now.well i did use it but got tired of changing pistons and head gaskets.motor never gave me a lick of problems with nitrous.the sc is a different animal,i miss my na set up with nitrous.i am thinking of going with w base stroker and the nx kit.ANYONE LOOKING FOR A V1 W/ANDERSON PIPE

[MustDangRider]

GO with the ZEX kit from AM. I see all few induction mods but no internal mods, I would say a 75 shot just to play it safe. Its an old engine, and I doubt it has less than 100K mi. It CAN handle a 100 shot BUT not too many of'em. THe ZEX kit is the safest, simplest kit out. ALL in my opinion.