Which injectors should i go w/

Fast1 · 08-25-2003

On this combo 331 edel heads,victor jr intake w/ secondary injector set,custom cam...Right now im running 36lb w/ out the blower but on the juice
any help would be great

GTRaptor · 08-26-2003

John, i dont think you should switch, 36 sound about right with the proper EEC program.

Do you have problems with the combo?

Fast1 · 08-27-2003

Nope i just purchased this blower "pick it up fri" going to put it on in the winter i just wanted to make sure i have enough fuel...I have the paxton inline pump and full areomotive fuel system to go w/ "lines,rails,regulator...The car is going to either recieve pms or a custom burnt chip

GTRaptor · 08-28-2003

mmmm...scary to run both Juice and a blower...

How much boost and juice at the same time?

Could be that you will need a bit larger injectors, depends on the total HP output.

Whats your HP estimate, and from that go one step larger.
Say 400 hp, then you need 36lb but for safety go for 42s to reduce the duty cycle. And use a big pump, 190lph minimum.

Dont use a FMU, better to have a dual program chip with 2 programs one for PSI only and another for PSI+Juice.
Install and adjustable FPR for fine tunning.

Select the right plugs, very important, you dont want stockers in there, go 1 step for regular use or 2 steps colder with both juise and boost.

Fast1 · 08-28-2003

No juice w/ the blower getting rid of it im tired of filling the bottle..What i am going to do is buy Kenne bell's water injection kit though