can i run a single turbo system on my 95gt and run it off only one side of the exhaust. this would simplify my install and be much cheaper any info would help!
if i used a t3/t4 would i get more boost from the t4 compressor and fast spool up from the t3 exhaust side would this be a good setup? id like to boost at 8psi and im going to use a modified starion inercooler. building an exhaust crossover just sounds like a pain and nobody will sell me just the exhaust portion of the kit. thanx for the reply
Do it right, run a single with a crossover so both banks can feed the turbo or run twins. It will unbalance the motor to do it the way you want, one side having all the load on it. Looks like it would cause funky wear to the rod/main bearings.
__________________
====================
Rad Craig http://www.rodsbyrad.com
95 GT
Incon 800tti Twin Turbo w/ Intercooler
American Racing Torq Thrust II's
- 17x11 and 17x9.5
- Yokohama AVS Sports
80mm MAF, 36# injectors, custom chip, 3.73's, Dual K&N's, HyFire Ignition, Jacobs Ultra Coil, HMS subframe connectors with cross braces, AutoMeter Guages, Walbro 255lph intank pump, straight 3" exhaust, no cats, no muffs
yeah you'll have to run your turbo set up like the whole V6 single turbo Z. I just was helping a friend out with one and both exhaust feeds the turbo it needs to be that way. I would just buy a complete TT kit for it to do it right.
Also how are you going to intercool it??
I can get ya the headers w/ cross over pipeall custom made
__________________
John Carrell
Be verwy verwy qwyite
It's import hunting season
1995 GTS..W/ a few basic bolt ons "It's a turd
|^^^^^^^^^^^) ||
| B u d w e i s e r | ||'""|""\___,
| _____________ l ||__|_|___| )
(@!)!(@)"""""**|(@) (@)***|(@)
hey, u guys may want to take a look @ this thread, i was discussing the identical topic in the 5.0 forum, http://allfordmustangs.com/forums/sh...109#post248109
i was contemplating puting twin or single turbo on my 89 worth the info, same topic different views
__________________
89 fox, mostly stock, C&L 73mm MAF, bypassed coolant hoses to egr spacer, intake silencer removal, no a/c, all options but power mirrors?? blown cats, msd cap and rotor, bosch wires, autolite plugs, 5 inch auto gauge tach with recal and blue lensed shift light, PAPER FILTER I BOUGHT ONE!!!!!!! felpro gasgets on everywhere accept oil pan and a nice big classic mustang decal on my back window
in order to get the boost levels that you will desire, you will want to build a crossover if you want to run one turbo........if you want twins, like i have, well, that's kinda obvious hehehehe hotwheels
__________________
my cars:
1992 mustang gt twinturbo'd
1988 mustang gt bottlefed
2004 mach 1 collecting dust
1989 mustang coupe 4cyl.
1980 mustang coupe 4cyl.
Insanemustangs.com
single turbo on mustang????? 
, msd cap and rotor, bosch wires, autolite plugs, 5 inch auto gauge tach with recal and blue lensed shift light, PAPER FILTER 
