Anyone use a boost-a-pump on 94/95? I need to know where to splice it into the fuel pump wiring in trunk. I know the color of wire but not the location. Thanks.
__________________
95 GT w/ AODE, TransGo shift kit, and trans cooler, SpeedCal, underdrive pulleys, stock MAF w/ center post removed, 70mm TB, digital A/F gauge, electric boost/fuel pressure gauge, 6# Kenne Bell w/ Flowzilla intake, ported GT-40 lower, 1 5/8" unequal headers, 2 1/2" ProChamber, 2 1/2" Borla catback exhaust, and 3.55's. Chrome Cobra R's. Cobra RR hood, double Saleen wing, billet grill, chrome strut tower brace and radiator hoses.
Take a look at the fuel pump inertia switch, located on the driver's side rear in the trunk. make a note of the wire colors at this connector. one wire is brown, the other wire is green with a yellow stripe. you will be splicing into this green/yellow wire as it snakes through the passenger compartment.
Pop off the plastic trim along the bottom of the door opening, on the driver's side. the wiring harness runs underneath the carpet. pull up the harness and tear off the plastic wrap to expose the wires.
Now, look for the fuel pump wire (green with yellow stripe). MAKE SURE YOU FIND THE RIGHT ONE! there is another wire that looks similar (olive green w/yellow stripe). you don't want that one
__________________
BBk CAI, BBk pulleys, ford racing polish70mm tb, port and polish upper intake plenum, 2 chambers flowmasters, ford racing 3.73 gears, pro 5.0
Got it guys. KB said there's a relay under the driver's seat (on the money Mike03Gt). Now does the door sill just have plastic clips? Just don't want to break anything. Thanks.
__________________
95 GT w/ AODE, TransGo shift kit, and trans cooler, SpeedCal, underdrive pulleys, stock MAF w/ center post removed, 70mm TB, digital A/F gauge, electric boost/fuel pressure gauge, 6# Kenne Bell w/ Flowzilla intake, ported GT-40 lower, 1 5/8" unequal headers, 2 1/2" ProChamber, 2 1/2" Borla catback exhaust, and 3.55's. Chrome Cobra R's. Cobra RR hood, double Saleen wing, billet grill, chrome strut tower brace and radiator hoses.
Need help wiring KB boost-a-pump 
