[FRKCHICAGO]

Anybody Out There Running A S/c And Nitrous.? Can You Tell Me What Kind Of S/c And Nitrous Systems You Are Using? How Much Boost And What Size Spray? What Kind Of Hp And Torque Numbers Are You Showing? Besides Forged Internals ,proper Tune, Injectors And Proper Fuel Flow Is There Anything Else That Needs To Be Considered? I Own A 2004 Gt With A Procharger, Set At 10psi. I Have All The Bolt Ons, Gears, Rear End Mods, Bigger Tires And Wheels. Im Running 389 Rwhp and 410 Torque. It Is Not A Daily Driver And I Dont Run At The Track So It Does Not Get Abused. I Will Be Adding A Meth Injection ,forged Internals ,heads And Cam In The Very Near Future. If I Go This Route Should I Get A Different Intake? Any Information On This Will Greatly Be Appreciated.

[stang2]

If you haven't added the forged internals, Your not going to be able to go with a lot of nitrous along with the blower. Maybe a small shot to help cool off the cumbustion temps . We have some strong runners in the area that combined power adders but made them work with Accel DFI tuning. Check with www.southeastperformance.com for help. These guys have been around along time.