[bamm624]

i have an 84 gt mustang w/ a late 70's windsor. it is bored 30 over w/ hyper. pistons. rebuilt stock heads at 9 to 1 compression. it has a 488 lift cam, 600 cfm holley carb and an edelbrock airgap intake. that is the basic info. i am wondering how many horsepower i am roughly looking at?

[andrewsg]

Roughly -- if its a 351.. from personal experience about 350lbs of torque.. 370 hp at the crank -- 320 at the wheels.

I had the same setup, but 'rollerized' -- a bit more info on the cam, the carb (dp, vac or mech?), etc -- can let you know more.

Also -- what tranny?

Best Regards And Good Luck,
G