[JTsShadowGT]

is there any way to put a stock 03 cobra supercharger on my 03 mustang gt.

[Nyt_Muves]

Originally Posted by JTsShadowGT

is there any way to put a stock 03 cobra supercharger on my 03 mustang gt.

I had the same question about 2 weeks ago. Here is the result of all my searching and all of the replies I got. I am assuming that you have figured out that you can get the blower off a terminator cobra very cheeply off of ebay and other similar sites. A lot of take offs for KB upgrades and the like. You can get the BLOWER part cheap. like a couple of hundred dollars cheap. However, a blower system is more than just the blower. In a word, yes, you can put that blower on your GT. However, you are looking at a LOT of hassle for something that will ultimately cost you as much as a good KB setup.

By the time you add the manifold, which will be a custom build, for around 3K, and the intercooler, and brackets and plumbing and EVERYTHING else you are missing, you will have a 5K plus headache when you could have had more power for less hassle and money.

So yes you can, but you probably dont want to.

[the98stang]

^^He's right. It'll cost more than it's worth.

[mbhmustang1998]

Originally Posted by the98stang

^^He's right. It'll cost more than it's worth.

Yeah they are both right. Its just like the same question can u put 4v cobra heads on your gt? Yes u can, but for the hassle and price u can get alot better PI heads and cams and make more power.

[EagleAutosports]

You'd be better off getting a blower designed for your 2V. Funny thing is you'd wind up making power in the Cobra's neighborhood and it'll be cheaper than swapping heads, cams, computer and then the blower.

[Jairazona]

Originally Posted by EagleAutosports

You'd be better off getting a blower designed for your 2V. Funny thing is you'd wind up making power in the Cobra's neighborhood and it'll be cheaper than swapping heads, cams, computer and then the blower.

I agree totally!!!

[Nyt_Muves]

Originally Posted by EagleAutosports

You'd be better off getting a blower designed for your 2V. Funny thing is you'd wind up making power in the Cobra's neighborhood and it'll be cheaper than swapping heads, cams, computer and then the blower.

Absolutely!! You can get a good KB setup making more power for the money that you would spend trying to cobble that together. And it will all fit properly, and everything you need will be there. It could take MONTHS to track down all the components to make that work. I am actually suprised that no one has compiled a kit to make this work at a reasonable price. I would have bought one long ago.