[curtisboyte]

I was just wondering has anybody used Line-X or Rhino linings to go on your floor pans and maybe under carriage for sound deading and for rust protection. I have visited a few bed liner websites and was wanting to get first hand information on it. Thanks Curtis

[kubitzford]

i have seen that but also POR 15 it bonds to the rust. and i have tried to remove it with a hammer and it wont even come off. its great stuff.

[curtisboyte]

Thanks for some info, how thick is por15 when installed?

[.boB]

Bedliner is not that good as an insulater or rust preventative. It's good at preventing dents, and keeps thing from sliding around. It works well under the car and in the wheel wells to eliminate rock dings and to keep that rock/sand noise under control.

For rust treatment and prevention, use POR-15. POR stands for Paint Over Rust. Clean off the metal as best you can, then apply the POR-15. After it dries, it forms a very tough surface that is pretty good about preventing more rust. But it has to be top coated with something.

For noise and heat, use lizard skin. It's a brush/spray on ceramic coating. It's about the same or a little cheaper than things like dynamat; but it works a lot better. You'll need about 3-4 heavy coats for good control, so it will take a 4-5 days to get it where you want it to be.

[john11rider]

you r wrong my dear,I have qwikliner spray on bedlinerQWIK Liner is a permanently bonded a protective barrier between your vehicle and the outside environment, protecting your investment from rust, dents, scratches, and chemical corrosion.

[.boB]

Yes, and they say the same thing about paint.

[pl1smith]

I am agree with john.I have qwikliner and it looks well.