go to where you had it done and have them do for cheap, or just a blow dryer to take if off then a bunch of adhesive remover, 3M makes a good areosal remover, that works good, but the pros should take if off cheap
__________________
1998 V6 Mustang
Clear Corners - Cobra Clear Headlights - Tinted Windows - Radar Detector - White Grill - K&N Air Filter
I would also suggest getting it professionally taken off. But if you really wanna do it yourself, use a blowdryer to keep heat on the edge, then pull it off slowly, but make sure it's warm.
__________________
-Steve Clark
Real Eyes Realise Real Lies
Legends never die.. R.I.P. John E. Lingenfelter ~1945-2003
I'd Love To Take It To A Pro BUt I Have It Up On Jacks ANd A Blown Head Gasket So Its Kinda Stuck In My Yard Besides I Am Taking Tint Off To Put Different Kind On So I Figured I Would Take It Off
__________________
1995 Mustang GT 5.0 HO
Mods: March Under Drive Pulleys, BBK CAI, MAC Full Length Headers & Hi-Flow H-Pipe With Cats, Flow Master 2 Chambers, BBK Caster/Camber Plates, Ebiach Sportline Springs , KYB Gas Adjust Shocks & struts, K&N Filter Charger, 180 degree thermostat, 3:73 FMS, Catapult Trailing Arms, BBK 255Lbph And Adjustable Regulator, Gripp Subframes, Cobra RR Hood, Red Top Battery, Pro 5.0 Shifter, Zex 75 Shot System, 1/4 Inch Wheel Spacers Rear, M&M 6 Point Cage
Plans Stroke It And
I just pulled it off and used windex to get the glue off after..... It worked.
__________________
]V[úggèr
2003 Black Mustang Cobra Coupe #2527
Born on 08/29/2002
Cobra grill emblem
Muskat racing carbon fiber bumper inserts
Ford Racing Billet Fuel door
Paul's High Performance CAI
Yea razors work to scrape the glue off, but for the most part it comes off real easily usually in one piece. And yea thats Muggers nice arse beast! Sexy aint it
__________________
-Steve Clark
Real Eyes Realise Real Lies
Legends never die.. R.I.P. John E. Lingenfelter ~1945-2003
Originally posted by 95mustanglover How Do U Remove Tinting Whats The Best Way?
Its Only Been On About A Year
Go to Auto Zone and buy a bottle of window tint remover. Spray the tint remover onto the window and let it set for about 5 minutes. After that the film will peel right off. The tint remover will actually sink into the film and start to break down the adhesive. Naturally, this will leave a sticky residue, but simply spray some more adhesive/decal remover and wait a minute or so. After that simply wipe off with a towel and the schmootz will come right off. Using this stuff plan on about 5 minutes per window. The most time is invested in simply waiting for the remover to sit. Total investment, about 5 bucks! PM me if you are concidering putting tint back on and I can tell you how to do that like the pros (and save you a couple humdred bucks too! Good luck!
Rob
__________________
1998 Saleen S-281 (Metallic Purple)
ProCharger P-1SC supercharger with sheet metal intercooler,Stage II Methanol injection,D.S.S. Level 20 short block .040+ balanced/ blueprinted,310 Stroker,Patriot Motorsports heads,Diablosport chip custom tunedn,Comp Cams (custom grinds)...and so on...
Tinting 
Stroke It And
