[yellow bullet]

would anyone have a clue where i could get a template or some other help on installing a hood scoop to a 02 stang, I just got it back from paint today and i'm biting at the bit to put it on but i want to do it right. any info will help.

[mattdeez]

Some people will probably tell you to use 3M double sided tape. But usually summer heat will take care of that stuff...and a hood scoop is not something you want flying off.

I had side scoops on my car and they were adhered w/ some kind of urethane the body shop used...and I still managed to have one fly...after about 2 years though...daily driven.

My rocker panels have been treated w/ the same urethane because good ole 3M tape kept coming off.

GtRaptor added a hood scoop to his car..you might want to hit him up.

[yellow bullet]

ITS DONE!! this is how i did it, I took all the bolts off the scoop and laid it on the hood so the black honeycomb front fit perfectly into the reccessed area in the hood. I then used white out and marked various areas around the scoop. after a little drying time i took the scoop and put the bolts back on it, went back and lined it up. now the bolts are suspending the scoop about an inch off the hood so i took the white out again and went around the bolts,( carefull not to move the scoop) and let that dry about five minutes I then picked the scoop up and had no white out where the bolts were so i knew exactly where to drill. took about 15 min alltogether.check out the pic!

[ScottHalliday]

Congratulations ... sounds like you did a Perfect Job on installing the scoop. Sure looks great in the Photo!

[mattdeez]

it does look good.

[meatball]

nice job, looks factory - How much was scoop & from where & how much to paint?

[yellow bullet]

I bought it on ebay, it was supposed to be off a wrecked stang and it was suppose to be the same color as my car. i payed 95.00 + 15.00 in shipping, recieved it and it was RED! luckily i have a friend at a body shop and he painted it for nothing. Thanks for the replys guys!